Long oil alkyd resins are those that have an oil content greater than 55%, something that helps give a smooth brushing action. Long oil alkyd resins are soluble in aliphatic type solvents (white spirit):Also with proper usage of additives and processing techniques it can be made water thinnable as well.
Product | Oil | Oil Length | Solvent | Solid % | Acid Value | Viscosity at 30 c In FCB4 | Uses |
---|---|---|---|---|---|---|---|
Unikyd L-60 | Linseed oil | 60 | NA | 99% | 15 | 50 - 60 (50% MTO) |
Letter press, Off set & Screen inks, High gloss paint enamels |
Unikyd L-100 | Linseed oil | 60 | NA | 99% | 15 | 120 - 140 (50% MTO) |
Primers, Under coats, Architectural finishes, Industrial enamels |
Unikyd D-100 | Castor Oil | 60 | NA | 99% | 15 | 120 - 140 (50% MTO) |
Primers, Under coats, Architectural finishes, Industrial enamels |
Unikyd CO-48 is Short Oil alkyd resin is based on Mix fatty Acids.
UNIKYD CO-48 has excellent colour, gloss and hardness and is recommended for use in Stoving Enamels and as a Plasticising Alkyd in NC Laquer formulations. It can also be used in Acid Catalysed Wood Finishes.
Product | Oil | Oil Length | Solvent | Solid % | Acid Value | Viscosity at 30 c In FCB4 | Uses |
---|---|---|---|---|---|---|---|
Unikyd CO-48 | Mixed Fatty Acids | 32 | Xylene | 70% | 20 | 150 -200(50% xylene) | Stoving Enamels,excellent color retention,NC & Amino resins compatible |
Product | Oil | Oil Length | Solvent | Solid % | Acid Value | Viscosity at 30 c In FCB4 | Uses |
---|---|---|---|---|---|---|---|
Unikyd S-701 |
Mixed Fatty Acids | 55 | MTO | 70% | 15 | 120-150 (50% MTO) | Air drying enamels, Primers |
Unikyd S-705 |
Soya Oil | 52 | MTO | 70% | 15 | 120-150 (50% MTO) | White enamels & Decorative paints, Non yellowing paints |
Product | Oil | Oil Length | Solvent | Solid % | Acid Value | Viscosity at 30 c In FCB4 | Uses |
---|---|---|---|---|---|---|---|
Unikyd AMR-90 |
L-100 modified with MR-25 | Xylene | 70% | 25 | 60-70 sec (50% Xylene) | Hammer finish paints, Steel furniture enamels, High corrosion resistance |
Medium oil alkyd resins are those that have an oil content between 40% and 55%. They are modified with Rosin to give faster drying and improve hardness,They are soluble in both aliphatic type solvents (white spirit) and more strong solvents like xylene or toluene.
Product | Oil | Oil Length | Solvent | Solid % | Acid Value | Viscosity at 30 c In FCB4 | Uses |
---|---|---|---|---|---|---|---|
Unikyd LR-50 |
Linseed | 42 | MTO | 50% | 20 max | 120-150 sec (40% MTO) | Industrial primer, Low cost air drying enamels |
Unikyd DR-50 |
DCO | 42 | MTO | 50% | 20 max | 120-150 sec (40% MTO) | Industrial primer, Low cost air drying enamels |
Unikyd DR-70 |
DCO | 42 | MTO | 50% | 20 max | 120-150 sec (40% MTO) | Industrial primer, Low cost air drying enamels |
Chain Stopped Alkyd resins are typically formulated for fast drying application by spray or brushing for automotives and industries. The tack free time is usually 5 minutes under suitable conditions.
Product | Oil | Oil Length | Solvent | Solid % | Acid Value | Viscosity at 30 c In FCB4 | Uses |
---|---|---|---|---|---|---|---|
Unikyd S-72 |
Fatty Acids | 38 | Xylene | 70% | 20 | 120-150 (50% Xylene) | Fast drying automotive refinishing & Industrial paints |
Unikyd S-92 |
Fatty Acids | 30 | Xylene | 70% | 20 | 175-200 (50% Xylene) | Fast drying automotive refinishing & Industrial paints |
Unikyd STY-01 is a Short Oil alkyd resin modified with Styrene.
UNIKYD STY-01 has excellent colour, gloss and hardness and is recommended for use in Roller coatings and Varnishes for metal surfaces for rapid drying.
Product | Oil | Oil Length | Solvent | Solid % | Acid Value | Viscosity at 30 c In FCB4 | Uses |
---|---|---|---|---|---|---|---|
Unikyd STY - 01 |
Mixed Fatty Acids | 32 | Xylene | 55% | 20 | 30-40 Poise @25 C | Very fast drying enamels, Excellent corrosion resistance |
Maleic Resin is manufactured from gum rosin and maleic anhydride via esterification with a polyhydric alcohol.
UMaleic Resins are mainly used for surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance.
Product | Softening Point | Acid Value | Viscosity @30 C of 50% sol in FCB4 | Solubility | Uses |
---|---|---|---|---|---|
UMALEIC MR 25 |
120-130 | 25 Max | 70-100 secs | Completely Soluble in Toluene, Xylene, Ethylacetate and NC | NC Laquers, Hammertone paints, Printing inks, Sanding sealers, Stoving varnish |
UMALEIC MR 20 |
115-130 | < 25 | 70-100 secs | Completely Soluble in Toluene, Xylene, White Spirits. | Slovent based Paints & Varnishes, NC Laquers, Sanding sealers |
Unisol M 70 |
NA | 25 | 100-110 secs | Available in 70% solution of MTO | Laquers, Paints |
UMALEIC SS 310 |
140-160 | 300-320 | 20-22 secs | Soluble In Alcohols, IPA, Butanol | Printing Inks, Over print varnish and Water based inks |
UMALEIC SS 210 |
140-160 | 200-220 | 20-22 secs | Soluble In Alcohols, IPA, Butanol | Printing Inks, Shoe Polish, Over print varnish and Water based inks |
UMALEIC SS 35 |
120-130 | 140-150 | 20-24 secs | Soluble In Alcohols, IPA, Butanol | Printing Inks, Over print varnish and Water based inks |
UNILITE Acrylic resins have excellent transparency, gloss and durability.
UNILITE Acrylic resins have superior heat, water and chemical resistance along with good hardness, adhesion and workability and are best for extensive use in application of automotive, flooring.
Product | Type | Solid | Solvent | Colour | Viscosity at 25 C | Hydroxyl Equivalent Wt | Uses |
---|---|---|---|---|---|---|---|
UNILITE 1100 |
Thermo setting | 55 | Xylene | 1 | 25 -35 Poise | 1100 | For Wood finishes , Industrial finishes & High perfomance PU Coatings |
UNILITE 1125 |
Dual component Polyol | 60 | Xylene | 1 | 30 -50 Poise | 600 | Good gloss and hardness achieved. Excellent surface drying, curing and flexibility. |
UNILITE 1001 |
Thermo plastic | 40 | Xylene | 1 | 30 -50 Poise | - | Air Drying Laquers for Gloss, Paver tiles, Wood and Metal decoration |
Unikopak1224 is a non-reactive Polyurethane resin with low colour and viscosity making it highly suitable for Flexographic and Gravure Inks and Laminating Inks. Its main applications are for flexible packagings and reverse printings. It has good compatibility with VAGH/NC.
Product | Type | Solid | Solvent | Colour | Viscosity at 25 C | Uses |
---|---|---|---|---|---|---|
UNIKOPAK 1224 |
Non-reactive | 70% | Ethyl-acetate | 1 | 12 to 20 poise | For reverse printing Gravure and Laminating Inks |
Unitone Resins are a Condensation product of cyclohexanone and aldehyde. They are hard resin typically used for improving gloss in flexo and gravure inks, automotive paints, high gloss lacquers.
Unitone Ketonic Resins have excellent gloss and elasticity for suspension of pigments, superior adhesion, good drying & pigment wetting properties and high oxidative stability
Product | Appearance | Melting point | Viscosity @30 C in FCB4 @ 50% solids | Uses |
---|---|---|---|---|
Unitone US 100 |
Pearl shaped granules, Transparent solids | 85-95 C | 18-20 sec | Flexo Inks, Laquers, Gravure Inks, Coatings, Screen Inks, NC based coatings |
Unitone US 110 |
Pearl shaped granules, Transparent solids | 90-98 C | 18-20 sec | Flexo Inks, Laquers, Gravure Inks, Coatings, Screen Inks, NC based coatings |
Unitone US 1000 |
Lump form, Pale yellow solids | 95-105 C | 20-22 sec | Specially for Ball Point inks Laquers and Printing Inks |
Unimide resin are dimer fatty acid based polyamide resin, It is mainly known as Alcohol or co-solvent soluble Polyamide resin. Some of the grades have good Low temperature Gel Resistance. It can also be blended with small amounts of spirit soluble NC to improve the hardness and resistance properties of inks. The solutions form reversible gels on standing. We do manufacture grades for special application for having tape test passed on Untreated HDPE and PP Substrate.
Product | Appearance | Softening Point | Amine Value | Acid Value | Viscosity @30C in FCB4 | Features | Uses |
---|---|---|---|---|---|---|---|
Unimide US-60 |
Bright Yellowish Beads | 110 - 120 | 7 | 7 | 60-80 secs in 40% Tol: But (2:1) | Co solvent soluble, Excellent gloss | Flexo & Gravure inks, Thixotropic Paints |
Unimide US-40 |
Yellowish Beads | 110 - 120 | 7 | 7 | 30-50 secs in 40% Tol: But (2:1) | Co solvent soluble, Compatible with IPA, Excellent gloss | Flexo & Gravure inks, High gloss liquid inks |
Unimide US-25 |
Yellowish Beads | 105-115 | 7 | 7 | 20-22 secs in 50% Ethanol | Completely soluble in Ethanol | For inks on alcohol based formulations, Food and Milk packs |
Unimide US-30 |
Yellowish Beads | 105-115 | 7 | 7 | 25-35 secs in 50% IPA | Co solvent soluble, Alcohol dilutable, Good gel properties | Flexo and Gravure Inks |
Unimide US-7910 |
Yellowish Beads | 105-115 | 7 | 7 | 20-25 secs in 50% IPA. | Alcohol Soluble, Excellent gel resistance & thaw property | Flexo and Gravure Inks, Over print varnishes |
Unimide 7399 |
Yellowish Granular | 105-115 | 7 | 7 | 20-25 secs in 50% IPA | Alcohol dilutable, Excellent wet pack and Gel resistance | Flexo and Gravure Inks |
UNIMIDE US 75 |
Dark Brown lumps | 105-115 | > 7 | > 7 | 25-35 secs in 50% IPA | Formulated Polyamide, Excellent slip resistance | For excellent adhesion on HDPE/LDPE substrate. Flexo and Gravure Inks |
Unimide Resins are a range of general purpose Liquid Amino Polyamide resin alternatively also known as Reactive Polyamide Resins.They are used as 2-Pack System with Suitable Epoxy resin.
Unimide Liquid Polyamide Resins exhibits very good exterior durability to weather and chemicals. They have superior adhesion with excellent curing and toughness.
It’s highly recommended uses are for Protective and Industrial Coatings, Floor Coatings, Epoxy formulations and for high gloss on artificial jewellery.
Product | Amine Value | Viscosity (Poise) @25C | Color | Uses |
---|---|---|---|---|
UNIMIDE 115 |
205-225 | 450-650 @ 40 C | 7 Max | High Build Coatings, Excellent for corrosion resistant coatings and Epoxy adhesives. |
UNIMIDE 115 X 70 |
160-180 | 7 Max | High Build Coatings, Excellent for corrosion resistant coatings and Epoxy adhesives. | |
UNIMIDE 125 |
280-320 | 450-600 | 8 Max | Excellent for protective surface coatings |
UNIMIDE 126 |
260-285 | 300-400 | 8 Max | Excellent for protective surface coatings. Adhesive for epoxy amide adduct and Artificial jewellery. |
UNIMIDE 140 |
350-400 | 120-180 | 8 Max | Excellent for protective surface coatings. Adhesive for epoxy amide adduct and Artificial jewellery. |
UNIMIDE 160 |
400-450 | 03-07 | 7 Max | Excellent in casting, Potting, Flooring, Civil enginering applications. |
UNIMIDE 250 |
270-310 | 200-350 | 9 Max | For Cost effective application |
This type are mainly for Offset ,letter press Inks derived by modification of Gum rosin with different types of Phenols.
Product | Melting Point | Acid Value | Viscosity @30 C of 50% sol in FCB4 Toluene | Heptane value | Solubility | Suggested Uses |
---|---|---|---|---|---|---|
PR-140 | 140-160 | 25 | 60-100 sec | 20 | Fully soluble in Aromatic & Aliphatic Hydrocarbons.Higher Alcohols Ketones | OPV, Lithographic inks, Letter press inks, Hard Drying Varnish primers. Paints |
PR-142 | 130-150 | 25 | 55-75 sec | 30 | Fully soluble in Aromatic & Aliphatic Hydrocarbons. Higher alcohol ketones. | OPV, Lithographic inks, Letter press inks, Hard Drying Varnish primers. Paints |
UNIPOL PR-75 is a Pure Phenolic resin. It is a thermoplastic resin with very good adhesion, hardness and gloss. UNIPOL PR-75 has excellent application for alcohol soluble inks, Flexographic and Gravure inks and inks for deep freeze resistance.
Product | Melting Point | Acid Value | Viscosity @30 C of 50% sol in FCB4 Toluene | Heptane value | Solubility | Suggested Uses |
---|---|---|---|---|---|---|
PR-75 | 70-80 | Phenolic acidity | 20-30 secs in 50% IMS | NA | Fully soluble in Alcohol | For Alcohol soluble inks, Deep freez Flexo/Grauve inks, Road marking paints, Rust prevention varnish and laquers |
UNIPOL PBV resin is excellent for use in applications that require strong binding, optical clarity, adhesion to many surfaces, toughness and flexibility. The major applications are for laminated safety glass, ceramics and printed circuit boards.
Product | Butyral Value | Bulk density gm/lt | Viscosity @ 30C in FCB4 | Suggested Uses |
---|---|---|---|---|
Unipol B-17 |
802 | 220-320 | 45-60 sec in 20% IMS | Wash primers, Metal & foil coatings, Wood finishes |
Unipol B-30 |
802 | 220-320 | 130-160 sec in 20% IMS | Ceramics, Adhesives, Lamination /Coatings, Printed circuit boards |
Unipol B-60 |
802 | 220-320 | 60-100 sec in 10% IMS | Ceramics, Adhesives, Lamination /Coatings, Printed circuit boards |
Product | Polymer Type | Color on Gardner | Solid | Viscosity @25C | Uses |
---|---|---|---|---|---|
UNIMINE MF 501 |
Melamine Formaldehyde | 1 max | 65 ± 2 | 15 - 20 | Highly reactive Butylated type curing agent for stoving paint |
UNIMINE UF 507 |
Mix Formaldehyde | 1 max | 65 ± 2 | 15 - 20 | Fast Curing at low temp for screen & Wood epoxy finish |
Product | Oil | Color on Gardner | Solid % | Acid Value | Oil Length | Uses |
---|---|---|---|---|---|---|
UNITRON | Mixed Fatty Acids | 7 | 100% | 20 | 45 | Helps incorporation of water in solvent borne paints & laquers. Alkyd Based |
UNIGUM is an Ester Gum resin produced by esterification of Rosin with Pentaerythritol producing a pale, intermediate hard thermoplastic resin.
UNIGUM Ester Gum has superior tackifying properties and very light colour making it highly suitable for Adhesives for bookbindings, carpets, tapes, Inks, paints and Road marking paints.
Product | Softening Point | Color on Gardner | Acid Value (mg KOH/g) |
Uses |
---|---|---|---|---|
UNIGUM E-90 |
85 ± 5°C | 2 Max. | 10 Max. | Adhesives & Inks |
UNIGUM E-95 |
90 ± 7°C | 2 Max. | 10 Max. | Hot melt Adhesives, Inks |
UNIGUM E-105 |
105 ± 5°C | 2 Max. | 20 Max. | Tackifier Resin, Tape labels, Hot melt adhesives, Sealants & Road marking paints. |