Liquid Polyamide Epoxy Hardeners
Uniform Synthetics is a liquid polyamide resin manufacturer in India, producing reactive Unimide epoxy hardeners for coatings, adhesives, flooring, casting and repair formulations.
Grades
7 grades| Grade | Colour (Gardner) | Viscosity | Amine Value | AHEW | Applications | TDS |
|---|---|---|---|---|---|---|
| Unimide 115 X 70 Solution | 7 max | 800–1,400 Poise @40°C | 160–180 mg KOH/g | Not specified | High-build epoxy coatings · Corrosion-resistant coatings · Epoxy adhesives | Request |
| Unimide 115 Viscous liquid | 7 max | 450–650 Poise @40°C | 205–225 mg KOH/g | 198 | High-build epoxy coatings · Corrosion-resistant systems · Epoxy adhesives | Request |
| Unimide 125 Viscous liquid | 8 max | 450–600 Poise @25°C | 280–320 mg KOH/g | 105 | Protective surface coatings · Industrial 2K epoxy systems | Request |
| Unimide 126 Viscous liquid | 8 max | 300–400 Poise @25°C | 260–285 mg KOH/g | 140 | Protective surface coatings · Epoxy amide adduct adhesives · Artificial jewellery | Request |
| Unimide 140 Liquid | 8 max | 120–180 Poise @25°C | 350–400 mg KOH/g | 95 | Protective surface coatings · Epoxy amide adduct adhesives · Artificial jewellery | Request |
| Unimide 160 Free-flowing liquid | 7 max | 3–7 Poise @25°C | 360–420 mg KOH/g | 95 | Casting and potting compounds · Self-levelling flooring · Civil engineering systems | Request |
| Unimide 500 Viscous liquid | 9 max | 200–350 Poise @25°C | 270–310 mg KOH/g | 195 | Low-cost primers · Floor coatings · Bangles | Request |
On phones, each grade is shown as a complete technical record.
Technical overview
Unimide liquid polyamide resins are used as reactive curing agents for two-component epoxy systems. Selected liquid polyamide resins serve as curing agents in epoxy floor-coating systems, as well as casting, potting and civil-engineering formulations; the curing agent is one component of the complete formulation. These products are distinct from the solid polyamide binders used in printing inks. AHEW, viscosity, amine value and supplied form guide grade selection, and the mix ratio and cure schedule must be confirmed with the chosen epoxy resin and complete formulation.
Selection considerations
- Product roleUnimide liquid polyamides are reactive curing agents for two-component epoxy systems.
- ApplicationsThe range serves coating, adhesive, flooring, casting and repair formulations.
- Grade characteristicsAHEW, viscosity and amine value support grade selection and the initial mix-ratio calculation.
Liquid polyamide resins technical information
Are liquid polyamide epoxy hardeners the same as printing-ink polyamide resins?
No. The liquid Unimide grades on this page are reactive polyamide curing agents for epoxy systems. Solid polyamide resins used as printing-ink binders form a separate product range with a different role and supplied form. The two ranges should not be treated as interchangeable.
How is a liquid polyamide epoxy hardener selected?
The epoxy resin and its equivalent weight establish the starting point. Curing-agent AHEW determines the initial mix ratio, while viscosity, amine value, cure schedule, application method and service exposure complete the evaluation. Shortlisted grades must be tested in the full formulated system.
Which Unimide grade is a low-viscosity polyamide curing agent?
Unimide 160 is the lowest-viscosity liquid polyamide grade in the current table. Viscosity alone does not determine suitability: the epoxy resin, EEW, calculated mix ratio, required cure, application and finished properties must also be reviewed before a trial.
Where are reactive liquid polyamide hardeners used?
The range serves two-component epoxy coatings, adhesives, flooring, casting, potting and civil-engineering repair formulations. Each application requires a grade and mix-ratio assessment using the selected epoxy resin, fillers, pigments, additives and actual cure conditions.
Does Uniform Synthetics supply liquid polyamide epoxy hardeners from India?
Uniform Synthetics manufactures and supplies liquid Unimide polyamide hardeners from India. Provide the application, epoxy resin, target viscosity, cure conditions and destination so the team can identify relevant grades and confirm packaging, current technical documents or sample options.