Phenalkamine Epoxy Curing Agents
Uniform Synthetics is a phenalkamine manufacturer in India, producing Unilite epoxy curing agents for marine, protective, floor and construction coating systems.
Grades
8 grades| Grade | Range | Solid % | Colour (Gardner) | Viscosity @25°C | Amine Value | AHEW | Applications | TDS |
|---|---|---|---|---|---|---|---|---|
| Unilite 7040 Viscous liquid (100% solids) SolubilityCompatible with standard epoxy diluents | Phenalkamine | 100 | 17 | 2,000–4,000 cP | 490–550 mg KOH/g | 81 | Marine epoxy systems · Protective industrial coatings · Floor coating primers | Request |
| Unilite 7041X90 Liquid | Phenalkamine | 88–90 | 17 | 3,000–6,000 cP | 265–310 mg KOH/g | 144 | Marine maintenance coatings · Protective industrial coatings · Spray-applied 2K epoxy systems | Request |
| Unilite 7041 Viscous liquid (100% solids) | Phenalkamine | 100 | 17 | 20,000–50,000 cP | 280–320 mg KOH/g | 130 | Marine maintenance coatings · Protective industrial coatings · Adhesion-critical primers | Request |
| Unilite 7057 Liquid (100% solids) | Phenalkamine | 100 | 10 | 500–1,500 cP | 320–360 mg KOH/g | 95 | Marine coatings · Protective and industrial coatings · Floor coatings | Request |
| Unilite 7077 Solution | Phenalkamine Adduct | 68–72 | 17 | 3,000–6,000 cP | 160–240 mg KOH/g | 164 | Marine 2K epoxy coatings · Industrial protective coatings · Fast-cure maintenance systems | Request |
| Unilite 7080 Solution | Phenalkamine Adduct | 78–82 | 17 | 3,000–5,000 cP | 230–270 mg KOH/g | 164 | Protective coatings · High-solids 2K epoxy systems | Request |
| Unilite 7300 Solution | Phenalkamine Adduct | 58–61 | 15 | 500–1,500 cP | 150–180 mg KOH/g | 190 | Marine coatings · Protective and industrial coatings | Request |
| Unilite 7562 Solution | Phenalkamine Adduct | 64–66 | 16 | 1,000–2,500 cP | 160–210 mg KOH/g | 175 | Marine coatings · Industrial coatings · Construction epoxy systems | Request |
On phones, each grade is shown as a complete technical record.
Technical overview
The Unilite range includes standard and adducted phenalkamine curing agents for marine, protective, floor and construction epoxy coatings. Solids, viscosity, amine value, AHEW and supplied form distinguish the grades. Selection should reflect the epoxy resin, substrate, film thickness and application conditions, with handling and cure verified in the complete system.
Selection considerations
- Coating applicationsUnilite phenalkamines serve marine, protective, floor and construction coatings.
- Grade formatsStandard and adducted grades offer different solids and viscosity ranges.
- Formulation checksCure behaviour, adhesion and resistance require testing on the prepared substrate under stated conditions.
Phenalkamine curing agents technical information
What is a phenalkamine epoxy curing agent?
A phenalkamine is an amine curing-agent chemistry used with epoxy resins. Unilite phenalkamines are evaluated in marine, protective, floor and construction coating systems. Cure behaviour, adhesion and tolerance of application conditions depend on the complete formulation, substrate preparation, film thickness and cure schedule.
How do phenalkamine and phenalkamine adduct grades differ?
Solids, viscosity, amine value, AHEW and supplied form provide the initial basis for selection across the Unilite range. Shortlisted standard or adducted grades should then be tested at the calculated mix ratio and intended film thickness under representative application and cure conditions.
How is the phenalkamine-to-epoxy mix ratio established?
Use the curing agent AHEW together with the epoxy resin EEW to calculate the initial stoichiometric ratio. Confirm those values against current product documents, then verify pot life, cure development and finished-film performance in the complete formulation under the intended conditions.
Does Uniform Synthetics supply phenalkamine curing agents from India?
Uniform Synthetics manufactures and supplies Unilite phenalkamine curing agents from India. Grade availability, packaging, samples and current product documents can be confirmed for the intended epoxy resin, coating application and destination.
What information helps with a phenalkamine sample enquiry?
Provide the epoxy resin and EEW, application, substrate, film thickness, cure conditions, required handling properties and destination. This information helps the technical team identify relevant Unilite grades and provide current technical documents or a sample for controlled formulation testing.